- VANTAGE POINT defines the space from below by creating a 6" or 8" wide
picture frame.
- Unique designs are encouraged
- Combine with 2" CONTURA for use along the straight edges of wave ceilings
- The strong, crisp reliability of extruded aluminum in colors that coordinate with
any suspension system
- Factory welded corners with 12" legs
- Fully integrated with acoustical and drywall ceiling systems
Green by Design:
- 60% Recycled Aluminum
- 48% Pre- Consumer Content
- 12% Post Consumer Content
- 2 LEED®1Credits - 4.1 & 4.2
- No Hazardous Waste
- No VOC’s
- No Heavy Metals
Materials:
- Aluminum Extrusion: 6063 per ASTM B 221 and ASTM B 221 Metric
- TC-2 Hanging & T-Bar Connector Clip
- CONTURA Splice Plate with Set Screws
Fabrication:
- 6" and 8" widths x 2" high x 12' length. Custom lengths and widths
are available.
- 10' standard taping fin length.
- Welded end caps and welded corners
Finishes:
- Acrylic Water Base
"Wet" Paints
- Custom and Standard
Powder Coats
- Specialty Powder Coats
- ACROGUARD®
- Antimicrobial
- Luminescent
- Metallic
- REVELATION®
- Translucent
|
|
|
|
VANTAGE POINT
|
|
Part # |
A |
B |
|
VANTAGE POINT 6" |
6" |
2-3/16" |
|
Custom edge trim... used to create a 6" wide picture frame...
|
|
|
|
|
VANTAGE POINT
|
|
Part # |
A |
B |
|
VANTAGE POINT 8" |
8" |
2-3/16" |
|
Custom edge trim... used to create a 8" wide picture frame...
|
Top
VANTAGE POINT Details
Top
1 LEED® is a registered trademark of U.S. Green Building Council
|